Express ring anchor M10

Express ring anchor M10

Express ring anchor for heavy loads, with single clip

Substrate: uncracked, reinforced or unreinforced plain concrete of class C20/25 ÷ C50/60 and (not included in the technical assessment) compact natural stone.

Advantages - properties

• the diameter of the threaded stud is at the same time the diameter of the anchor - significantly higher strength compared to sleeve anchors of the same size,
• very fast installation - especially suitable for serial fixings using a large number of anchors,
• selected sizes with cold-formed anchor bolt, which gives higher hardness and strength of steel and guarantees precision,
• through-hole fastening - significant time savings and convenient installation,
• thread length appropriately matched to the overall length of the anchor,
• optimally developed clip geometry - secure fastening even in lower quality concrete,
• smooth anchor head - protection against thread damage during driving,
• rounded strut cone on the underside - easier driving, especially through wooden elements,
• special thickening on the anchor shank, keeping the clip in the correct position even when encountering reinforcement or voids in the substrate,
• a rich range of sizes - the possibility of fixing even very thick elements,
• national technical assessment of the Institute of Building Technology (ITB).

Application:

For heavy-duty fastening of statically loaded elements of building structures

In non-cracked concrete or natural stone. For the installation of barriers, frames, gratings, storage racks, grids, etc.

Product Description:

Fasteners consist of a threaded rod terminated on one side with a strut cone,

with a strut ring, a hex nut and a washer. Tightening the nut causes the strut sleeve to slide over the strut cone, spreading the strut part and permanently anchoring the fastener to the substrate. It is necessary to make a mounting hole with a drill with a diameter equal to the diameter of the thread. Before installation, the hole should be thoroughly cleaned.

Technical data :

•     material: carbon steel, cl. 5.8, electro-galvanized
•     length: 90 mm
•     thread: M10
•     maximum thickness of the fastened element h(ef): 20 mm